✓ Whole-house repipes in 1–2 days
Up to half the price of a regular plumber
We specialize in repipes, so we're faster than a general plumber, and you pay less.
Nearly half of San Francisco's housing predates 1940. DBI wants a permit before anyone cuts into or replaces pipes, so we apply through PermitSF, arrange the inspector and swap out the supply pipes inside your home.
Tell us your building type and when it was built. A free visit from us ends with a written quote.
Free estimate. We never spam.
“Travis did the copper. Inspector passed it first shot. All done!”
“The pipe replacement was finished in one day. The crew was experienced, professional, and left everything clean when they were done. We were very happy with the work.”
“They finished the repiping job quickly and did great work. Any questions or concerns I had were handled right away. The work passed inspection without any problems.”
What Homeowners Say
Local Facts
Census estimates for 2020–2024 count about 415,000 housing units in San Francisco, and the median one was built in 1946. Before 1940 accounts for 45% of the total, before 1970 for 69%, and just 14% has gone up since 2000.
The other number that shapes plumbing work here is 18%, how much of the housing is detached. The rest are row houses, flats and units in larger buildings. So before anything else, we want to know what you own: a whole structure, or one unit with shared risers and an HOA. That changes what we can quote.
Age alone will not tell us what is behind your plaster. A remodel decades ago may have touched some pipes and skipped others. If your water lines are original to a pre-1970 building, they have passed 50 years in service. An estimate is free, and it is the honest way to find out.
The San Francisco Public Utilities Commission is your retail supplier. By its 2025 report, Hetch Hetchy Reservoir accounts for up to 85% of what is delivered in a year, Bay Area reservoirs make up the balance, and about 0.42% groundwater was blended into the San Francisco supply. Treatment includes ultraviolet light and chlorine, then chloramination.
That report's hardness average is 62 ppm, with readings between 8.1 and 112 ppm. The number counts calcium and magnesium in the water, the same minerals that leave crust behind when a drop dries on a faucet. It describes the water, not your pipes.
People hear about the SFPUC's galvanized replacement work and assume it covers their house. It does not. A service line connects the main in the street to your building, and a repipe deals with what runs inside.
Still, the utility's figures are worth reading. It reports no known lead service lines. It confirmed 1,495 galvanized service lines on the utility side and had replaced 1,433 with copper as of January 2026, with lead whips found in 19% of the ones it removed. On the customer side, it identified 699 galvanized lines recommended for replacement and 109 of unknown material that it is working to confirm. Those customers may request a free lead test. Look your address up at sfpuc.gov/Lead.
Joe Eichler's San Francisco houses are concentrated on four Diamond Heights streets: Amethyst Way, Amber Drive, Cameo Way and Duncan Street. The Eichler Network gives the count as 100 in one article and nearly 100 in another, and calls them the only single-family Eichlers in the city. Claude Oakland designed them, and most are attached row homes or paired townhouses on steep lots. With flat roofs and no attic, these homes are a case for running new water lines over the roof where the layout allows. Shared walls and sloped lots are the things we check first.
The rule is plain: you need a permit before cutting into or replacing pipes, particularly those going behind a wall. Plumbing permits are applied for online through PermitSF by a licensed contractor, which means your repipe application comes from us, under CSLB #1057926. City inspectors see the work before it is covered, and arranging that visit is on our list too. For your own questions, DBI's Permit Center help desk is on the second floor at 49 South Van Ness, 628-652-4900. The local rulebook is the 2025 San Francisco Plumbing Code, the state code with city amendments, in effect since January 1, 2026 under Ordinance 226-25.
Sources: ACS 5-year estimates 2020-2024 for San Francisco city (tables B25034, B25024, B25035); SFPUC report for the City, 2025: sources, hardness, galvanized counts; Diamonds in the Rough, Eichler Network; Suburbia in the Sky, Eichler Network; SF.gov plumbing and mechanical permit instructions; Publisher's note, 2025 San Francisco Plumbing Code.
How We Repipe
City buildings are tight, and neighbors may be on the other side of a wall. We start by working out where your supply lines run and which ones serve only you. From there we plan targeted openings, thread the new pipe to each fixture, and shut down the old lines once the new ones are tied in.
Most homes need 1–2 days. We plan each shift so your taps work when it ends, though that is a plan and not a promise. Moving out is rarely necessary, and when it does come up it is nearly always a very large home.
If your lowest level is a slab, the pipe goes up in the first-floor ceiling. Nothing gets run beneath the concrete.
Over-the-roof routing suits an Eichler or similar flat-roof slab house, since there is no attic to hide lines in.
Each opening gets a patch and enough texture to sit with the surrounding wall. You choose when and how to paint.
Know the Signs
If the SFPUC map flags your service line, it is reasonable to ask what the pipe looks like past that point, inside the home.
Weak pressure at one fixture may be the fixture. Weak pressure at several floors of an old building points deeper.
With 69% of the city built before 1970, some homes may hold pipes of different ages. Repeated leaks at the older sections are a useful clue.
Your Options
Parts and labor are warrantied either way. Uponor PEX-A gets 25 years, and Type L copper gets 30. In a city where most people share a building, your HOA may have an opinion, so ask before you choose.
Cost
You are looking at Bay Area ballparks, shared with the repipe cost calculator. The low end of each is a single story sitting on a raised foundation. At the top, think of two stories over a slab. San Francisco buildings often do not fit either picture neatly, so treat these as a starting point.
| Home | Uponor PEX-A | Type L copper |
|---|---|---|
| 1 bathroom | $8,500 – $18,700 | $10,000 – $22,800 |
| 2 bathrooms | $12,100 – $27,200 | $14,300 – $33,200 |
| 3 bathrooms | $14,600 – $31,600 | $17,200 – $38,500 |
| 4 bathrooms | $17,600 – $37,300 | $20,800 – $45,500 |
Your written quote replaces the ballpark once we have seen the building, including access and any shared plumbing. If you want to spread out the payments, see how financing works.
Our Process
A no-cost visit, then a written quote covering your home.
As the licensed contractor, we apply before pipes get cut.
Fixtures tied in one by one, usually over 1–2 days.
The inspector sees the work. We then patch and texture.
Repipe Champions repipes homes in San Francisco regularly, most recently in Jan 2026.
See recent repipes on the mapCommon Questions
More in San Francisco
We specialize in repipes and take care of PermitSF and the DBI inspection. Choose PEX-A or copper. Most homes finish in 1–2 days.
Licensed repipe specialists serving the Bay Area